ACID METAL 2027 Has Arrived — Production Boards, Logos and a Passion for Turns
Share
ACID METAL is a Snowscoot board brand born to explore the full pleasure of turning and pursue the fastest slalom lines.
Just Arrived! The logo-finished production version of ACID METAL 2027 is here.

Snowscoot began as a bicycle for the snow. As it evolved, frames and boards opened up more and more terrain to riders, just as skis and snowboards do. After introducing the sample this summer, we can finally show you the logo-finished production boards.
A Snowscoot turn—even that one thing has so much depth. ACID METAL brings a specialist focus to that part of riding.
ACID METAL is a specialist Snowscoot slalom / carving board set focused on the turn. Set the edges, lean the machine, and work the front and rear together. Flex the nose and tail to carve your own line through the snow. The design starts with the freedom of carving turns and aims to let riders explore fast lines in slalom competition.
The narrow shape is slimmer than a conventional board, making deep lean angles possible with less effort. Take care not to lean so far that the handlebar, knees, straps or frame catch the snow and send you flying.
The boards have length without looking excessively long. They do not look overly narrow, but compared with modern powder boards the shape is distinctly sharp, with a long effective edge.
Matte silver with understated logos
The matte silver topsheet and understated nose and tail logos give the production boards the presence of an alpine snowboard.

The effective edge is extended close to the board’s limits, with very little nose height. Moguls and uneven terrain are not its strength. Take care here too—avoid getting thrown off.
Dimensions and sidecut
- Front board: overall length 849 mm; widths shown in the drawing 289 / 226 mm.
- Rear board: overall length 1080 mm; widths shown in the drawing 221 / 268 mm.
- Center thickness: 11 mm.
- Triple sidecut radii (R): 15000 → 14000 → 13000 mm.
Overall lengths and widths are rounded to the nearest millimeter. Widths are listed as shown in the drawing, without assigning them to nose or tail.
Mounting-pitch options
- Standard Snowscoot 385 mm pitch
- JYKK wide pitch, including G70 and STYLE-G
- T3 120 mm pitch
- AR short pitch: 265 mm
- INSANE / DOC short pitch: 233 mm
- One 230 mm pitch position for Snowmoto
Please contact us with your frame details to confirm fitting, bushings and setup.

There is also the appeal of exploring setup: trying different bushings, or considering reinforcement with a carbon plate, to explore turn feel and the lines you want to ride. Compatibility and fitting need to be checked for each combination; contact us before choosing parts.
Factory-sanded base
The running surfaces are sanded before shipment. Wax the boards before heading out to ride. Enjoy sharp carving from firm groomed runs to steep, icy slopes.

For additional tuning, please contact us separately by LINE or phone (+81-76-425-5422). Allow approximately 2–4 weeks for this additional service.

This product is a front and rear board set. Frames shown in the fitting photos are not included.
ONE D and overseas-specification DOC fitting examples
The red frame is a ONE D; the green frame is an overseas-specification DOC. Please check compatibility and mounting requirements for your own frame.

Red ONE D fitting example.

Green overseas-specification DOC fitting example. Frames are not included in the board set.
Draw your own carving lines with different frames and machines—and challenge yourself to your fastest slalom line!
View the ACID METAL 2027 front and rear board set — US$805.
Contact TOOLATE SPORTS for compatibility, dispatch timing and international shipping from Japan.